ADHESION TESTER (RIGHT ANGLE) 0–3500PSI (0–25MPA)
The Adhesion Tester is one of the most accurate and versatile adhesion testers currently available.
It measures the adhesion bond strength of applied coatings with ease and precision.
The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin. This ensures an exactly central point-loading of the force.
The maximum value achieved at pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.
Ensures effective quality control with a non-destructive capability. To allow the specification minimum to be proven, the dolly can be removed using the heated dolly remover supplied.
If necessary, the dolly can be left in place for testing during service as part of a planned maintenance programme.
Pressure Gauge Resolution: psi 20, Mpa 0.2
Accuracy: ±1% FSD
- ISO 4624
- ISO 16276-1
- ASTM D4541
The Right Angle version of the Adhesion Tester enables the user to test the adhesion of coatings inside pipes with a minimum diameter of 150mm (6”).
The Adhesion tester is frequently bought together with: